You power your home with energy, but do you practice electrical and appliance safety? The reports that 31,000 home electrical fires occur every year, and with over 180 cases involving electrocution or electricity-related incidents that could have been avoided, home electrical safety is too important to ignore. At 海角大神, we care about the safety of our customers, and by following these electrical safety tips at home you can protect yourself and your family.
听
10 Tips for Electrical Safety at Home
Many electrical fires by following some simple electricity safety tips.听In our home electrical safety checklist below, there are 10 precautions every homeowner should know and follow. Always remember to ask a professional if you鈥檙e uncertain about the safety of an electrical outlet or appliance. Download a PDF of the听10 tips checklist.
1. Always follow appliance instructions for improved electrical safety.
"Read the instructions" should top the list of electrical safety tips at home. Understanding home appliance safety improves both the performance of your device and your personal safety. Should any appliance give you even a slight electrical shock, stop using it until a qualified electrician checks it for problems.
听
2. Watch out for overloaded outlets to protect your home.
Overloading an electrical outlet is a common cause of electrical problems. Check all outlets to ensure they are cool to the touch, have protective faceplates and are in proper working order. According to , you can follow these electrical outlet safety tips:
- Do not use extension cords or multi-outlet converters for appliances.
- Only plug one heat-producing appliance into an outlet at a time.
- Hot outlets should be checked by qualified electricians.
- Remember that power strips only add outlets鈥攖hey do not change the amount of power the outlet receives.
- can be used to monitor outlet power loads and even shut off appliances should an outlet begin to overheat.
3. Replace or repair damaged electrical cords to keep your home safe.
Damaged power cords are a serious residential electrical safety risk, and they are capable of causing both fires and electrocution. All power and extension cords should be checked regularly for signs of fraying and cracking, and they should then be repaired or replaced as needed. Power cords should not be stapled into place or run under rugs and furniture. Cords under rugs pose a tripping hazard and can overheat, while furniture can crush cord insulation and damage wires.
The use of extension cords on a regular basis may mean that you don鈥檛 have enough outlets to fit your needs. Have a qualified electrician who understands electrical safety rules install additional outlets in rooms where you often use extension cords. When purchasing a power cord, consider the electrical load it will carry. A cord with a load of 16 AWG can handle up to 1,375 watts. For heavier loads, use a 14 or 12 AWG cord.
Pro tip: AWG stands for 鈥淎merican wire gauge.鈥� The lower the number, the thicker the cord!
4. Keep your used and unused cords tidy and secure to prevent damage.
Electrical safety tips don鈥檛 just apply to power cords when they鈥檙e in use鈥攃ords also need to be stored safely to prevent damage. Keep stored cords away from children and pets (who may chew on or play with the cords). Try to avoid wrapping cords tightly around objects; this can stretch the cord or cause overheating. Never rest a cord on a hot surface in order to prevent damage to the cord鈥檚 insulation and wires.
听
5. Unplug all your unused appliances to reduce potential risks.
One of the simplest electrical safety tips is also one of the easiest to forget: when an appliance is not in use, unplug it. Not only does this save you power by (the amount of energy the device consumes even when not actively in use), but unplugging unused appliances also protects them from overheating or power surges.
It鈥檚 often difficult to remember to unplug unused appliances, but the new generation of offers a solution, allowing you to set power schedules for each outlet.
听
6. Keep electrical devices and outlets away from water to prevent shock.
Water and electricity don鈥檛 mix well. To follow electrical safety rules, keep electrical equipment dry and away from water prevents damage to appliances and can protect against personal injury and electrocution. When working with electrical appliances, it鈥檚 important to have dry hands. Keeping electrical equipment away from plant pots, aquariums, sinks, showers and bathtubs lowers the risk of water and electricity coming into contact.
听
7. Give your appliances proper space for air circulation to avoid overheating.
Without proper air circulation, electrical equipment can overheat and short out, and can become an electrical fire hazard. Make sure your appliances have proper air circulation, and avoid running electrical equipment in enclosed cabinets. For best electrical safety, it鈥檚 also important to store flammable objects well away from all appliances and electronics. Pay especially close attention to your , as these need to be situated at least a foot from the wall to function safely.
听
8. Ensure that all your exhaust fans are clean to prevent fire hazards.
Some appliances have exhaust fans, which can get dirty or clogged with debris and make the appliance work harder. This can shorten the life of the appliance and can cause a risk to the home due to overheating, or even cause a buildup of dangerous gasses that can lead to an electrical fire hazard. Cleaning exhaust fans regularly helps prevent such hazards.
听
9. Check that you鈥檙e using the correct wattage in all your fixtures and appliances.
Using the right bulbs can prevent electrical problems, so check all lamps, fixtures and appliances to ensure you鈥檙e using the correct wattage. If a light fixture has no wattage listed, use 60-watt bulbs or less. For unmarked ceiling fixtures, choose 25-watt bulbs.
Pro tip: LED bulbs consume less power and reduce the risk of fixtures overheating. Learn more about .
10. Be aware of heaters and water heaters to prevent potential accidents.
Combustible items should be kept away from and built-in furnaces. For furnace safety, store combustibles far away from any heating appliances. Portable heaters should not be operated close to drapes, and to prevent tipping, they should only ever be placed on a stable surface.
On a related note, do you know what temperature your water heater is set to? High temperature settings eat into your and can cause burns and unintentional scalding, especially in homes with small children.
听
Electrical Safety for Kids
Young children are naturally curious and are quick to explore the world, so it鈥檚 important to protect them. Teaching them electrical safety tips for kids can keep them safe and alert.
Install safety caps and covers over all outlets to keep your kids safe.
Installing safety caps and covers on outlets prevents children from inserting objects into the outlet, protecting them from shock.
Prevent accidents by teaching your kids to avoid yanking on cords.
Tell your kids not to pull on electrical cords. Yanking can damage or fray the cord and compromise electrical safety. For kids, show them to pull cords out of an outlet by carefully holding the plug, and not pulling on the cord.
Place dangerous appliances out of reach of small children.
Keep dangerous appliances away from children until they鈥檙e old enough to operate them properly and understand electrical safety at home. Tips include storing toasters, blenders and electric kettles on high shelves or in locked cupboards鈥攁nywhere children cannot access them.
Electrical safety for kids goes beyond teaching them safe practices. Tell them about what energy is, and where it comes from, with energy facts for kids.